REDARC Universal Tow Pro Extended Brake Controller Install Wiring Kit

Contains : 1x REDARC Universal Tow Pro Extended Brake Controller Wiring Kit

Specifications:

Rating : 12V
Weight (g) : 970
Dimensions : 290x290x65mm
Warranty : 2 Years
Available separately : Vehicle-specific Switch Insert / Alternative length Remote Head Cable

Product Description

The REDARC Universal Tow-Pro Extended Wiring Kit supports the installation of the Tow-Pro Elite electric trailer brake controller into a wide range of vehicles. It provides all the parts and wiring flexibility to fit most vehicles.

It is suitable for vehicles where the start battery is on the other side of the vehicle from the rest of the installation via 3.7m power cable length. The only difference between this kit and Universal Tow-Pro Wiring Kit is the length of the positive power connection.

The Universal Tow-Pro Extended Wiring Kit range replaces Tow-Pro Wiring Kit range and consolidates the range from 10 kits down to 3.

The Universal Tow-Pro Extended Wiring Kit comes with the complete range of hardware required to install a Tow-Pro Elite brake controller and contains a Wago Boot, Encapsulated Protection Device, Wiring Harness, Mounting Bracket and fitting instructions.

The standard 1m Remote Head cable that comes supplied in the REDARC Tow Pro Elite V3 Electric Brake Controller will support the location of the remote head in the centre of the vehicle when the main unit is located around the glovebox area. If the preferred location for the remote head in these instances is on the driver's side, you will need to purchase and fit the 2m remote head cable.

Modern vehicles continually feature new technology, the last couple of years have seen a rise in modern driving aids such as Autonomous Emergency Braking, Adaptive Cruise Control, lane departure and collision avoidance. REDARC's range of Universal Wiring Kits is compatible with this new technology.

When you use a REDARC Universal Tow-Pro Extended Wiring Kit you ensure a high-quality and fast installation of the award-winning Tow-Pro Elite electric trailer brake controller.

About Redarc

REDARC has over 40 years' experience in the research, design, development and manufacture of a range of electronic voltage converters and associated products including inverters, power supplies, battery chargers, brake controllers and trailer braking products.

REDARC are committed to supplying the highest quality products to customers, which is supported through a strong commitment to continuous product improvement and new product development.With over 250 years combined experience in our engineering department, a purpose-built design and manufacturing facility and a hand-picked production team, REDARC has the capability to conceptualise, design, test and manufacture products from smart relays to complex load sensors.

All REDARC products are tested for electromagnetic compatibility (EMC). Our testing equipment has been specifically designed to ensure that all of our products meet the standards required by our most demanding customers.Every REDARC product is tested before it leaves the facility.