REDARC 52mm Dual Oil and Water Temperature Gauge - Measure from 60 to 150 Degree

Contains : 1x REDARC 52MM Dual Temperature Gauge

Specifications:

Standby Current Draw : 30mA
Input (Operating) Voltage : 6 - 16V
Height (mm) : 42
Weight (kg) : 0.05
Warranty : 2 Years

Features

• Satin Chrome Bezel
• 13 Selectable Backlight Colours
• Multiple programmable alert levels with amber or red backlight and audible beep
• Display illuminates when park lights are turned on so you can check oil pressure and temperature without turning on the ignition
• If fitting more than one REDARC gauge, a communications link can be connected between the gauges to change the backlight colour of all at once

Product Description

The REDARC 52mm dual temperature gauge is ideal for monitoring your engines oil and water (coolant) temperature.

This gauge is supplied with two REDARC 1/4 NPT thread temperature senders that measure from 60 to 150°C.

Oil subjected to excessive temperatures can lose its lubrication properties that keep metal parts from touching. If the oil temperature rises above a desired limit, you can reduce the load placed on the engine or transmission to reduce the temperature and prevent engine failure. Similarly, monitoring the water (coolant) temperature of your engine ensures that it does not overheat, resulting in major engine damage.

Temperature Sensor*

This gauge also supports one of four optional temperature sensors.You will need to purchase one of the REDARC temperature sensors to equip the gauge with this function.

The REDARC 24 to 12 Volt adaptor can be used to connect this gauge to a vehicle with a 24 volt ignition and lighting supply, however only a 12 volt battery can be monitored.

Enhanced Lighting Controller*

REDARC recommends the purchase of an Enhanced Lighting Controller with this gauge. The Enhanced Lighting Controller is designed to enhance the lighting of your REDARC gauges as only one required for a set. It is to be used when you do not have a dimming circuit to connect your gauge to or the dimming circuit in your vehicle does not dim the REDARC gauge to your liking.

The Enhanced Lighting Controller also allows you to program nighttime brightness and colour of your REDARC gauges, including dimming if connected to a dash dimmer. Once programmed your gauges will change colour when turning on your park lights and back to a daylight colour when you turn them off. The Enhanced Lighting Controller is also 24 volt capable.

* = Optional accessory, not included with standard purchase

About Redarc

REDARC has over 40 years' experience in the research, design, development and manufacture of a range of electronic voltage converters and associated products including inverters, power supplies, battery chargers, brake controllers and trailer braking products.

REDARC are committed to supplying the highest quality products to customers, which is supported through a strong commitment to continuous product improvement and new product development.With over 250 years combined experience in our engineering department, a purpose-built design and manufacturing facility and a hand-picked production team, REDARC has the capability to conceptualise, design, test and manufacture products from smart relays to complex load sensors.

All REDARC products are tested for electromagnetic compatibility (EMC). Our testing equipment has been specifically designed to ensure that all of our products meet the standards required by our most demanding customers.Every REDARC product is tested before it leaves the facility.