REDARC 12V 100A Dual Battery Isolator - Microprocessor Controlled Smart Start

Contains : 1x REDARC 12V 100A Dual Battery Isolator

Specifications:

Input (Operating) Voltage : 12VDC
Output Current Rating (Cont.) : 100A
Input Fuse Rating : 100A
Output Fuse Rating : 100A
Length (mm) : 80
Width (mm) : 75
Height (mm) : 63
Weight (kg) : 0.2
Type Approval : CE
Warranty : 2 Years

Features

• Overmould design
• Compact in size and easy to install
• Silver contacts for longer life and suitable for marine applications
• Power saving technology
• Fault indication
• Fully surge protected

Product Description

The REDARC Smart Start SBI2 is a microprocessor-controlled battery isolator used in dual battery systems as a solenoid priority system. It will protect the start battery from excessive discharge, whilst allowing the auxiliary battery to supply non-essential loads. The SBI2 provides 12 volt DC incorporating 100A of continuous ratings.

Power Saving Technology

The battery isolator is primarily used in 4WD and commercial vehicles and incorporates electronic components that will prevent the solenoid from generating high voltage transients. It is better than a diode battery isolator due to the voltage drop associated with diode type isolation. It features a low standby current draw and sophisticated fault detection and LED indication of operation to warn the user of faults including over-voltage, voltage drop and excessive current draw conditions.

This battery isolator is a safe way to charge a dual battery system and should often be installed with a high quality fuse kit.

About Redarc

REDARC has over 40 years' experience in the research, design, development and manufacture of a range of electronic voltage converters and associated products including inverters, power supplies, battery chargers, brake controllers and trailer braking products.

REDARC are committed to supplying the highest quality products to customers, which is supported through a strong commitment to continuous product improvement and new product development.With over 250 years combined experience in our engineering department, a purpose-built design and manufacturing facility and a hand-picked production team, REDARC has the capability to conceptualise, design, test and manufacture products from smart relays to complex load sensors.

All REDARC products are tested for electromagnetic compatibility (EMC). Our testing equipment has been specifically designed to ensure that all of our products meet the standards required by our most demanding customers.Every REDARC product is tested before it leaves the facility.