Name: Enerdrive 100Ah Elite Bundle Inc Dc40 Ac40 and 1000W Canopies Caravan Camper
Brand: Enerdrive
SKU: Enerdrive-EL-WH2209-D069
Price: 2995.95 AUD
Availability: InStock

Description

Contains :

Enerdrive 100Ah Elite Bundle Inc Dc40 Ac40 & 1000W

Epower 1000w Inverter

Model - Description	ePOWER 400	ePOWER 1000	ePOWER 2000
Part Number	EN1104S	EN1110S	EN1120S
AC Output Power	400W	1000W	2000W
AC Output Current	1.74A	4.3A	8.7A
AC Surge Power (Peak)	800W	2000W	4000W
AC Output Voltage	230 Vac / 50 Hz
AC Output Waveform	True Sinewave
AC Output Socket	1 outlet	1 outlet	2 outlets
Nominal DC Input Voltage	12.5 VDC
No Load battery draw	< 0.8 ADC	< 1.2 ADC	< 1.2 ADC
DC Input Voltage operating range	10.5 - 15.5 VDC
Under Voltage Alarm	11.2 VDC
Under Voltage Shutdown	10.5 VDC
Under Voltage Recovery	11.8 VDC
Over Voltage Shutdown	15.5 VDC
USB	5V, 1A	5V, 750 mA	5V, 750 mA
Safety and Environmental
Conformance	All required Australian Standards
Agency Markings	RCM
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 60°C
Relative Humidity	5-90% noncondensing
Operating Altitude	Up to 3000 meters above sea level
Weights and Dimensions
Weight	1.73Kg	2.9Kg	5.5Kg
Dimensions (W x L x H)	177 x 200 x 90mm	177 x 325 x 90mm	230 x 416 x 110mm
Warranty	2 Years

12v 100ah eLITE Battery

Normal Specification	EPL-100-12VLITE
Nominal Voltage	12.8V
Nominal Capacity	100Ah
Cycle Life (DOD - 80% under controlled conditions)	≥ 2000 Cycles
Standard Charge Specification (Lithium profile charger required)
Battery Charge Temperature	0 ~ 45°C
Normal Charge Voltage CV/CC*	14.20 ~ 14.60V
Standby (Float) Voltage	13.50 ~ 13.60V
Maximum Charge Current	80A @ 25°C for 30mins
Recommended Charge Current for Maximum Life	≤33A
Standard Discharge Specification
Battery Discharge Temperature	-20 ~ 60°C
Battery Output Voltage Range	11.00 ~ 14.60V
Maximum Discharge Current	100A @ 25°C ± 5°C for 30mins
Pulse Discharge Current	450A for 1.0s
Discharge Cut-off Voltage	≤11.20V
Circuit Protection	The battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimize each single prismatic cell during charge & discharge, to protect the battery pack from overcharge, over discharge & short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery.
Over-Charge Protection
Over-charge Protection Per Cell	3.90V ± 0.03V
Over-charge Release Per Cell	3.60V ± 0.05V
Over-charge Release Method	Discharge below release voltage
Over-Discharge Protection
Over-discharge Protection Per Cell	2.50V ± 0.05V
Over-discharge Release Per Cell	3.20V ± 0.05V
Over-discharge Release Method	Apply Charge/Voltage ≥12.8V
Battery Manual Reset Button	No
Over Current Protection
Discharge Over Current	110A for 30s - 450A for 1s
Protection Reset Time	5s Auto Release
Over Current Release Method	Disconnect Load
Over Temperature Protection
Battery Discharge Over Temperature	Protection to 65°C ± 5°C
	Release at 50°C ± 5°C
Battery Charge Over Temperature	Protection to 55°C ± 5°C
	Release at 45°C ± 5°C
Short Circuit Protection	Auto release after 5s
Mechanical Characteristics
Dimensions	Length 310mm
Designed to be mounted in the upright position	Width 170mm
	Height 225mm
Weight	Approx 12kg
Storage Information
Temperature & Humidity Range	≤ 30 days -20°C ~ 35°C, 45 ~ 75% RH
	≥ 30 days -10°C ~ 30°C, 45 ~ 75% RH
Self-discharge Rate	≤ 3% Per Month

Enerdrive Dc2Dc 40+

Model	EN3DC40+
Output Rating
Output Voltage	12V Nominal (8.0V min)
Output Current (Maximum)	40A ~ 50A
Output Power	775W
Charger DC Output (CH1):
Selectable Battery Type	Gel, AGM, Flooded, Lithium, Program
Charger Voltage Range	13.8V - 15.5V
Float Voltage Range	13.0V - 13.8V
Charger Current (User Selectable)	5/10/15/20/25/30/35/40/45/50A (default 40A)
Equalize Voltage (Flooded Battery)	15.5V
Equalize Charging Current	10% of Bulk Current Setting
Charging Control	2 stage / 3 stage selectable (Default 3 stage)
DC Output Bank	Single
Current draw from CH1 when not in use	< 50mA
Battery Temperature Setting	Low/ Normal/ High (Battery Temperature Sensor Standard)
Efficiency	95%
INPUT Rating (CH2 - MPPT Solar)
Input Voltage	14.5 - 45VOC
Maximum Input	≤ 23V input, 500W (600W allowable) ≥37.5V-45V input, 750W (800W allowable)
INPUT Rating (CH3 - Start/Alternator)
Input Voltage	10.5 - 16VDC / 21 - 32VDC
Dimensions
Height x Width x Depth	242mm x 172mm x 74mm
Unit Weight	1.85 Kg
Shipping Weight	2.17 kg

ePOWER 12V 40A Battery Charger

Model	EN31220	EN31240	EN31260	EN32430
CHARGER OUTPUT
Output Current (Maximum)	20A	40A	60A	30A
OUTPUT VOLTAGE RANGE
Charge	14.2 - 15.5 V			28.4 - 31.0V
Float	13.4 - 13.8 V			26.8 - 27.6V
- Equalize	16.0 V			32.0V
Charging Control	Four stages (Bulk/Absorption/Float/Maintenance)
	Two stages (Bulk/Absorption)
	Constant Power Supply (Program setting)
	Priority Battery Bank Charging
DC Output Bank	Three (1 fully independent, 2 common with diode isolation)
Selectable Battery Type	Gel, AGM, Flooded, Lithium, Program
Standby Current	< 2 mA
CHARGER INPUT
AC Input Voltage (Nominal)	90 to 265 VAC
AC Input Operating Range	207-265 Vac (2.0 A Max)90-125 Vac (3.8 A Max)	207-265 Vac (3.8 A Max)90 - 125 Vac (7.7 A Max)	207-265 Vac (5.9 A Max)90-125 Vac (11.3 A Max)	207-265 Vac (5.9 A Max)90-125 Vac (11.3 A Max)
AC Input Frequency Range	47 - 63 Hz
Power Consumption	350W (Full Load)	700W (Full Load)	1050W (Full Load)	1050W (Full Load)
Power Factor Correction	Yes
Charger Efficiency	> 82%
PROTECTION AND FEATURES
Reverse Polarity	Yes, (with user replaceable fuse/s)
Over Charge	Yes, unit shutdown
Over Temperature	Yes, unit de-rated and shutdown
Output Short Circuit	Yes, (with user replaceable fuse/s)
Cooling	Forced air ventilation (thermo controlled fan)
Temperature Setting	Hot, Normal, Cold (no sensor connected)
Battery Temp Sensor Port	RJ12 (standard battery temp. sensor supplied)
DISPLAY
LCD Display (with back light)	Charging status, Battery Voltage, Output Current & Fault Codes.
AC INPUT AND DC OUTPUT CONNECTION
AC Input Connection	IEC with Supplied 1.2M Power Lead
DC Output Connection	Heavy Duty Terminal (3 banks) - Pan Heads 6mm Thread
DC Output Ground	Single Heavy Duty Common Ground Stud
ENVIRONMENTAL AND OPERATING TEMPERATURE
Storage Range	-40° to 70° C
Operating Range	-20° to 60° C
Humidity	5-95%, relative humidity non-condensing
Ingress Protection	IP32 (Basic drip proof in vertical orientation)
	Base Unit Weight and Dimensions
Weight: (kg)	2.4	2.6	4	4
Dimension: (mm) L x W x H	295 x 206 x 86	295 x 206 x 86	356 x 206 x 99	356 x 206 x 99
Optional Accessories	Remote Digital Display / Enerdrive Part Number EN3REM
Regulatory Compliance	Complies with AS/NZS 60335.2.29 Including Australian deviations.

Why Choose Enerdrive?

1.Enerdrive Specialise in Complete Power Systems,One Call, No Fuss.

2.Have Peace of Mind With Their 5 Year Warranty.

3.Enjoy a Life Time of Unrivalled Australian Tech Support.

4.Take Advantage of Their Expert In-house Design & Manufacturing Team.

5.State-of-the-Art Tools and Technology.

Guides

Shipping & Returns

Shipping

See more shipping details here >>

We offer FREE shipping most arear in Australia wide excludes big and bulky items.

For big and bulky items as well as some rural addresses are subject to a shipping fee that is calculated at checkout. See more shipping details here.

Returns

See more returns policy here >>

We offer 100% Fitment Guarantee, but if you choose to return an item we offer 60 day returns policy with a full refund. See more returns policy here.

Warranty

You can claim warranty here >>

All products sold by 4wheelhouse are sold under the Manufacturer’s warranty and conditions from the date of purchase, unless otherwise stated on the item.

You can claim warranty here.

Reviews

Write Your Own Review