Airone COM-TH02H/F Stainless Braided Hose 1500mm w Flare Fitting With 3/8" Flare Fitting

Content : 1 x Stainless Braided Hose 1500mm w Flare Fitting

Specifics
NEW RELEASE Light weight 1500 mm Braided Air Hose with 3/8" Flare Fitting.
3/8 bore size rather than the current 5/16.
high temperature range of -60 to 240 degrees C.
Maximum Working Pressure 2390 PSI with swaged collar lock steel tails.
Burst Pressure 9560 PSI.
Minimum Bend radius 125mm.
Light weight at 150 grams per meter.
Stainless braid.
PTFE teflon liner.
700mm or 1500mm lengths

Specifications

We have introduced a whopping 3/8 bore size rather than the current 5/16 to increase speed and volume of airflow so air moves super fast form compressor to tank.
The combination of the Stainless steel braided shroud covering the PTFE Teflon liner means that the hose will operate perfectly from minus 60 degrees to 240 degrees Celsius and the bend radius can be as tight as 125mm providing you even more options and protection when it comes to fitting to your vehicle.
Finally if you ever worried about bursting a hose, don't be. The new BOSS hoses have a huge Working Pressure of up to 2390 PSI and an incredible burst Pressure of 9560 PSI and swagged collar locked steel tails will seal tight as a fishes bottom, and thats water tight!

Airone - Performance Suspension

To get the best performance from your kit inflate airbags just enough to achieve a level ride height.

By doing this you are also allowing all of the suspension components to share the extra load of the vehicle and not putting any unecessary pressure on any one individual part of your vehicles suspension.