This category or part requires full vehicle information including Body Type and Engine detail to better ensure the parts fit. By clicking 'Yes, go ahead' to confirm more vehicle information. By clicking 'No, go back' to return to Shop by Parts page.
In stock
Manufacturer Part Number
AIRONE-4WD-WH2406-KA141
Airone Rear Heavy Duty Air Bag Suspension Load Assist Kit 2.27T LA-11
Now: Special Price$659.95was$791.94Save 17%RRP(- 17% Off)
1 x Rear Heavy Duty Air Bag Suspension Load Assist Kit (2.27T)
SUIT:
Mercedes Sprinter 1995 On
The Load Assist Kit comes with:
2 x Extreme Series Double Bellow Airbags
4 x brackets (2 upper & 2 lower)
Mounting Hardware
Quality SAE J844 Government Approved Airline
Dual Schrader Valves Mounted in Stainless Panel
Instructions for fitting
Strength & Specifications
* Support Wires - 9 High Tensile Central, 4 Each End
* Cured Natural rubber
* Ballistic woven reinforcing
* 6mm Zinc Plated Steel End Caps
* Burst Pressure - Over 600psi
* Independent Test Pressure - 480psi
* Recommended working range - 5psi - 160psi
* Airone air bags have a recommended test pressure of 480psi. That meets the pressure vessel industry guidelines of 3 times the maximum working pressure.
* Airone air bags are undeniably the strongest in the automotive industry and exceed any other airbag brands by nearly double.
* When Airone air bags are utilised in the load assist applications it's virtually impossible to pull the bags apart. Since The Airone air bags started manufacturing ,There never had an airbag fail from bursting.
The Airone Extreme series airbags are rated at 2500lb or 1136kg per side and have been government approved tested to over 750psi.
Average dual cab ute will run around 15-45psi depending on load.
NOTE: This kit is not suitable for a lowered vehicle due to the limited space between the chassis and axle.
Airone - Performance Suspension
To get the best performance from your kit inflate airbags just enough to achieve a level ride height.
By doing this you are also allowing all of the suspension components to share the extra load of the vehicle and not putting any unecessary pressure on any one individual part of your vehicles suspension.
All products sold by 4wheelhouse are sold under the Manufacturer’s warranty and conditions from the date of purchase, unless otherwise stated on the item.